Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD
Add to Cart
ASTM/ ISO Standard Non-woven Plastic PP Medical Protective Mask Melt Flow Index Test Equipment
Product Introduction:
The non-woven plastic PP (polypropylene) in the mask generally has a flowability of 1000 ~ 2000g / 10min, which is a super-high-flow plastic. It cannot be tested by the melt index meter of the ordinary mass method, and we should use the volume Method of melt index test.
General Specifications:
Packaging Dimensions:(L×W×H)1240×630×900mm
Power supply source: single-phase, 220V±10%, 50/60Hz (can be appointed)
Gross Weight: 130kg
Standards:ASTM-D1238, ISO 1133
Product Application:
Melt Flow Index Tester is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon fluorine and other plastic polymers. The automatic temperature control methods of the machine three kinds of blanking ways, manual, timing and automatic control according to operation method, which can realize melt-mass flow rate (MFR) and melt-volume flow rate (MVR) two test methods.
Standard Parameters:
| Item | Parameters |
| Testing range | 0.1-800.00g/10min (MFR); 0.1-800.00 cm3/10min(MVR) |
| Temperature range | Room temperature-400°C |
| Controlling Accuracy | ±0.2°C |
| Timing accuracy | 0.1s |
| Displacement accuracy | 0.01mm |
| Standard loads | 325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g |
| Combination load | 325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g |
| Material cutting method | Manual, timing and automatic cutting (optional) |
| Time setting | 0.1~999.9min |
| Cylinder | Diameter 9.5504±0.0076mm |
| Land of piston | Diameter 9.4742±0.0076mm, length: 6.35±0.13mm |
| Thin hole pattern | External diameter: 9.5±0.02mm; bore diameter 2.0955±0.0051mm; length 8.00±0.025mm |
| Machine Size | (L×W×H) 40×51×60cm |
| Weight | 42kg (not including the weights) |
| Power | AC220V, 50Hz, single phase |
| Accessory | One set computer& software, one tool box, one piece operation video CD and one piece English manual |
| Design standard | ASTM-D1238, ISO 1133 |