Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD
Add to Cart
Sponge Furniture Testing Machines Foam Indentation Hardness Testing Machine
Introduction:
Sponge indentation hardness testing machines compression testing machine is also known as sponge , foam indentation hardness testing machine ,and can do tensile metallic and non-metallic , polymer materials , compression , bending , detection of low cycle fatigue and other projects can be according to customer product requirements according to GB , ISO , ASTM , JIS , EN and other standards for the preparation , to automatically strike the biggest test , fracture strength , yield strength , tensile strength , compressive strength , flexural strength , elastic modulus , elongation , constant elongation stress , elongation and other parameters given stress .
Measurement Principle :
The sample is placed between the upper and lower platen , the pressure plate at a predetermined speed compression specimens down to a certain size when national standards concavity A method ( B method , C Act ) as required , on which the load cell to sense the pressure back to the computer processing and display , so the measured pressure sponge , foam and other materials such as depression sample hardness .
Technical Parameters :
| Item | Parameter |
| Capacity | Sensor 100KG-2T |
| Motor | Panasonic 400W servo motor |
| Drive | 400w servo drive |
| Screw | Imported ball screw |
| Control mode | Computer control, windows mode operation |
| Speed | Speed adjustable (computer adjusted) 0.1-500mm / min |
| Maximum stroke | 1200mm (including fixture) |
| Span | ≤400mm |
| Load resolution | 1 / 250,000 |
| Load accuracy | ≤0.5% |
| Unit switching | gf / kgf / N // kN / LBf / W / T |
| Dimensions | (L * W * H) 880 * 510 * 1490mm; |
| Weight | about 150Kg |
| Power supply | 1∮, AC 220V |
| Configuration | (Pull-up) Fixture is standard according to customer's sample, (Down-pressure) includes 200mm diameter pressure plate and 380mmX380mm tray with holes |
Design Standards :
GB/T10807-2006
Features:
1, the amount of depression set in advance, through the timing circuit to accurately control the amount of depression;
2, easy to use: the use of high-precision pressure sensors and large-scale integrated circuits;
3, test methods: In addition to the national standards of the test method, but also free to set the test method;
4, pressure plate speed: the default speed of 100MM / MIN; can be set according to the need to run speed;
5, transmission: precision ball screw, measuring no noise;
6, the thickness of the measurement: to automatically calculate the measured sponge thickness;
7, the curve shows: you can simultaneously display and retrieve the test time, pressure and pressure into the depth of the curve;
8, data transfer: the mouse on the curve at any point, you can real-time display time, pressure and pressure into the depth;
9, data preservation: the experiment can be done for each time to save the data, but also can set a good test method to save;
10, the test process: real-time display test process;