Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD
Add to Cart
PLC Melt Flow Rate Tester , LCD Plastic Testing Equipments For pvc pvb
Brief introduction
HD-R804-1 type with industrial PLC programmable controller, LCD operating platform, temperature part is separate temperature unit, LED digital display. Automatic temperature control aircraft from the operating method is divided into manual, time control, automatic three cut material way, to achieve Quality Act (MFR) and the volumetric method (MVR) two kinds of test methods; aircraft to the measured temperature of the test material the melt density, the system also has the temperature calibration.
PLC Melt Flow Rate Tester , LCD Plastic Testing Equipments
Purpose:
Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate ratio FRR and other functions, this machine high precision temperature control, key parts nitriding treatment, high strength and hardness , small deformation accurately measure the flow rate which provides a good condition.
Principle:
Thermoplastic melt flow rate (melt index) is plastic at a temperature and load, the melt every 10 minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow characteristics. For thermoplastics and chemical fiber raw materials, quality assurance of products and other products of great significance.
According to the standard
This instrument reference standards: ISO 1133, ASTM D1238, JIS-K72A, GB/T3682, JB/T5456, JJG 878
Application Industry:
Polyethylene, polypropylene, polystyrene
ABS, polyamide, fiber resin,plastic ,rubber,tube
Acrylic, polyoxymethylene, fluoroplastics
Pvc, pvt polycarbonate and other plastic materials
The main technical parameters:
| Testing range | 0.1-800.00g/10min (MFR) |
| Temperature range | Room temperature~400°C |
| Controlling Accuracy | ±0.2°C |
| Timing accuracy | 0.1s |
| Displacement accuracy | 0.01mm |
| Standard loads | 325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g |
| Combination load | 325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g |
| Material cutting method | Manual, timing and automatic cutting (optional) |
| Time setting | 0.1~999.9min |
| Cylinder | Diameter 9.5504±0.0076mm |
| Land of piston | Diameter 9.4742±0.0076mm, length: 6.35±0.13mm |
| Thin hole pattern | External diameter: 9.5±0.02mm; bore diameter 2.0955±0.0051mm; length 8.00±0.025mm |