Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD
Add to Cart
Computeried Rubber Test Rheometer Mooney Viscometer
Brief introduction:
Rubber Test Rheometer Mooney Viscometer is used for determination of raw rubber or mix Mooney viscosity of rubber mixing equipment, provides three kinds of measurement data, one is the determination of Mooney viscosity, secondly, the determination of the stress relaxation characteristics, the determination of three for the scorch time
High precision sensor, control system, rotation system, temperature control system, data transmission mode, display mode, rotor, measurement and control mode are the main technical indexes of the meney viscometer.
The main technical parameters:
| Item | Specification |
| Temperature Range | Room temperature to 200°C |
| Temperature Resolution | 0.01℃ |
| Temperature Control Accuracy | ±0.3°C |
| Rotor Speed | 2±0.02 R/M |
| Torque Range | 0-200MV |
| Torque Resolution | 0. 1MV |
| Test Report | Date, Temperature, Mooney scorch curve, MV, T5, T35, T3, T18, @15, @30 |
Design standard:
ASTM D5289-95, ISO6502:1991, GB/T16584
Test Standards For Sharing:
Film/Plastic Film
Ø ASTM D882: Tensile Test
Ø ASTM F1306: Puncture Test
Ø ASTM D1938: Trouser Tear Test
Ø ASTM D2732: Thermal Shrinkage Test
Ø ASTM D1709, ISO 7765-1: Free-Falling Dart Method
Ø ASTM D1894: Static and Kinetic Coefficients of Friction
Ø ASTM D1424, ASTM D1922, ISO 1974: Elmendorf Tearing Strength Test
Plastic& Plastic Pipe:
Ø ISO 180: Izod Impact Test
Ø ISO 9966: Ring Stiffness Test
Ø ISO 179: Charpy Impact Test
Ø ISO 4892: Weathering Aging Test
Ø ASTM D3163: Plastic Lap-Shear Test
Ø ISO 4422, ISO 3127: Pipe Impact Test
Ø ASTM D4565, ISO 11357, EN 728: DSC/OIT
Ø ISO 75: Heat Deflection Temperature (HDT)
Ø ASTM D1598: Hydrostatic Pressure and Burst Test
Ø ISO 1133, ASTM D1238: Melt Flow Rate Test (MFR/MVR)
Ø ASTM D790, ISO 178, ISO 14125, ASTM D6272: Bend Test
Ø ISO 306, ASTM D1525: Vicat Softening Temperature (VST)
Ø ASTM D882, ASTM D 638, ISO 527, ASTM D1708: Tensile Test
Rubber:
Ø ASTM D412, ISO 37-2005, JIS K6251, DIN 53504-2009: Tensile Strength & Elongation Test
Ø ASTM D1149-07, ASTM D1171-99, ISO 7326, ISO1431-1, DIN 53509-1: Ozone Aging Test
Ø ASTM D624-00, ISO 34-1: Tearing strength Test
Ø ASTM D395-03, ISO 815-1: Compression Set Test
Ø ASTM D2240-05, ISO 7619-1, JIS K6253, ISO 868: Shore Hardness Type A/D
Ø ASTM D573, ASTM D865, ISO188 Method B, DIN 53508 High/ Low Temperature Test
Ø ISO 2781(Method A): Density Test
Ø ASTM D5289-95/ ISO6502: No-Rotor Rheometer/Curemeter
ØASTM D1646: Mooney Viscometer
