Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD
Add to Cart
Easy To Operate Touch Screen Control Fatigue Suitcase Tester For Brifecase Test
Overview
Usage
This tester is used to test fatigue of the reciprocating rod for the luggage. During the test, the rod would be stretched and then test whether there will be backlash, loose, connecting problems and transformation of the rod.
Touch Screen Fatigue Testing Machine For Luggage Trolley Reciprocating
Theory
Under certain pulling and pressing frequency, To check the reciprocating fatigue performance of the pull rod, rod structure of fastness and durability of the switch through the luggage lever lock with a pull rod is continuously pulling switch, reciprocating and pressing.
III.Design Criteria
Design criteria: QB/T 2919-2007.
IV.Equipment Instruction
Operation steps (picture 1)
Suitcase Pull Rod Reciprocating Tester include 1-9 specified parts:
1,Sample clamp holder: adjust the test size
2,pull rod holder
3,Rod movement device: do reciprocating motion ,and the speed and travel can be adjustable
4,support frame:the height is not less than 1500 mm, Install pulling, pressing travel guide
5,pull rod lock switch gear
6,counter:count the movement times
Control panel (picture 2)
Introduction
1. power:the machine main power
2. Controller: setting lever operating procedure
3. Strength sensors: show the current value and maximum of the sensor
4. stop: press the key and stop when abnormal situation need to stop the machine in operation
5. Start: start the test and press again the machine will stop
Specification (table 1)
| Item | Specification |
| Test travel | 20～100cm Adjustable |
| test times | 1～999,999 Automatic shutdown |
| Test power | pneumatic cylinder |
| Specimen height | 100cm |
| Auxiliary equipment | Bags fixed clamp |
| Pressure | 5～8Kg/cm2 |
| Machine size | (L×W×H)100×100×200cm |
| Power | 1∮,220V/50HZ |
| Weight | About150kg |
The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
Factory:
FAQ
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.