Dongguan Haida Equipment Co.,LTD
Dongguan Haida Equipment Co.,LTD
Add to Cart
Pot Handle Rotary Bending Fatigue Testing Machine
APPLICATIONS& TEST PURPOSE :
The machine is used to test handle fatigue of cutlery, it load the handle, raising and lower under 15000 cyclic, then check the handle deformation or loose.
DESIGN STANDARD : EN 12983-1
STANDARD PAREMETERS :
| The level surface was covered by a 5 mm thickness rubber having a hardness 50 ± 10 shore | |
| 1 mm clearance between the cam and the follower when the cam at lowest position | |
| Lower and raising speed of the test specimen | 25 times/minute |
| Test cyclic | 15000 cyclic (adjustable) |
| Fixture | two fixtures suitable different cutlery |
| Out dimension | (L×W×H) 625mm×450mm×750mm |
| Power | 1 phase, AC 220V, 50～60Hz |
